o
When using HDMI ZONE2, the devices does not function properly
Symptom Cause / Solution Page
When using MAIN ZONE,
video output is interrupted
in HDMI ZONE2.
0
With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video
may be interrupted in HDMI ZONE2.
－
When using HDMI ZONE2,
no video or audio is output
from the TV in ZONE2.
0
Check that the power is on for ZONE2. 144
0
Check the input source for ZONE2. 144
0
The AUX1-HDMI connector on the front panel does not support the HDMI ZONE2 function. －
0
In ZONE2, playback is only possible when the input signals are HDMI signals. －
0
When the TV does not support the input audio format, audio is not output. Set the audio format to “PCM”
on the playback device. Alternatively, set “ZONE2 Setup” - “HDMI Audio” in the menu to “PCM”.
207
0
When the TV is not compatible with the resolution of the input video, no video is output. Set the output
resolution on the playback device to a resolution that is compatible with the TV.
－
When using HDMI ZONE2,
MAIN ZONE audio is
played back as PCM.
0
When the same input source is selected for MAIN ZONE and ZONE2, the audio format is limited
according to the specifications of the TV in ZONE2.
－
Contents Connections Playback Settings Tips Appendix
237
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
