EasyManuals Logo
Home>Denon>Receiver>AVR-X3100W

Denon AVR-X3100W User Manual

Denon AVR-X3100W
297 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Connecting speakers
Install speakers and connect them to this unit. (v p. 25, 29)
Speaker installation
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
.
FHL
FL
SW1
C
SL
SBL
FHR
FR
SR
SBR
SB
SW2
FWL
FWR
FL/FR (Front
speaker left/right):
Place the FRONT left and right speakers an equal
distance from the main listening position. The distance
between each speaker and your TV should also be the
same.
C (Center
speaker):
Place the CENTER speaker in front of and at the
center of the TV, between the front left and right
speakers.
SL/SR (Surround
speaker left/right):
Place the SURROUND left and right speakers an
equal distance to the left and right sides of the main
listening position. If you don’t have surround back
speakers, move the surround speakers slightly behind
your listening position.
SBL/SBR
(Surround back
speaker left/right):
Place the SURROUND BACK left and right speakers
an equal distance from the main listening position and
directly behind the main listening position. When using
a single surround back speaker (SB), place it directly
behind the listening position.
FHL/FHR (Front
height speakers
left/right):
Place the FRONT HEIGHT left and right speakers
just outside of the front left and right speakers.
Mount them as close to the ceiling as possible and
aim them towards the listening position.
FWL/FWR
Front wide speakers (left/
right):
Place the FRONT WIDE left and right speakers
outside of the front left and right speakers so that there
is an equal distance between all front speakers.
SW 1/2 (Subwoofer) :
Place the SUBWOOFER at a convenient location near
the front speakers.
Contents Connections Playback Settings Tips Appendix
25
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X3100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3100W and is the answer not in the manual?

Denon AVR-X3100W Specifications

General IconGeneral
Receiver typeSurround
Speaker selectorA+B
Audio output channels7.1 channels
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)180 W
Power output per channel (20-20KHz@8 Ohm)105 W
HDMI in8
Remote control in1
Composite video in3
Multichannel audio input typeTerminals
Component video (YPbPr/YCbCr) in2
12V triggerYes
Speakers connectivity type-
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Supported radio bandsFM
Product colorBlack
Audio decodersDolby Digital EX, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Volume controlRotary
Apple docking compatibilityNot supported
Power consumption (standby)0.1 W
Power consumption (typical)600 W
Weight and Dimensions IconWeight and Dimensions
Depth388 mm
Width434 mm
Height167 mm
Weight10700 g

Related product manuals