Denon AVR-X3200W User Manual

Listening to Pandora
®
1
Prepare for playback.
0
Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 61))
2
Press ONLINE MUSIC.
3
Use uio p to select “Pandora”, then press ENTER.
.
Favorites Internet Radio
Online Music
Media Server
4
If you have a Pandora account, use ui to select “I
have a Pandora account”, then press ENTER.
0
If you do not have a Pandora account, to select “I am to new to
Pandora”, then press ENTER. The URL of Pandora and activation
code are displayed. Access the Pandora web page from your PC
and register the displayed activation code and account
information. Then press ENTER.
.
BACK
BACK
Pandora
I have a Pandora account
Please go to
http://www.pandora.com/denon and follow
the instructions there to create a new account.
Your activation code is : zzzzzz
I am to new to Pandora
Cancel
Continue
This is an identification code required to
register your purchased product to the
Pandora service.
This code is used to obtain your account.
Contents
Connections Playback Settings Tips Appendix
99
Front panel Display Rear panel Remote Index

Denon AVR-X3200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Audio (L/R) in	5
Composite video in	3
USB ports quantity	1
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	vTuner
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	650 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	11300 g