Denon DHT-S217 User Manual

Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
1
Press c to turn on power to the unit.
2
Press and hold the main unit's c, d and + at the same
time for at least 5 seconds.
The status LED blinks in red three times.
3
Wait for around 10 seconds after the LED turns off and
then press c.
All settings return to the factory settings after the sound bar is
restarted.
Contents Connections Playback Settings Tips Appendix
38

Denon DHT-S217 Specifications

General

Audio decoders	Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
TV Sound Share	Yes
RMS rated power	- W
Audio output channels	2.1 channels
Woofer diameter	75 mm
Tweeter diameter	25 mm
Woofer diameter (imperial)	3 \
Tweeter diameter (imperial)	1 \
Subwoofer location	Built-in
Product color	Black
Wall mountable	-
HDMI in	1
Connectivity technology	Wireless
Power consumption (standby)	0.5 W
Number of products included	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	890 mm
Height	67 mm
Soundbar weight	3600 g