NORMAL CD PLAYBAC
(1) Starting Playback
1 Press the power switch (POWER) to turn on the power.
2 Load the disc you want to play.
• When the disc holder is closed, the disc is read and the number of
tracks and total playing time of the disc are displayed.
3 Press the play button.
(2) Stopping Playback
DVANCED CD PLAYBAC
1 Press the stop button.
• When all tracks have been played on a disc, playback will stop
by itself.
Precautions:
• If no disc has been loaded or the disc has been placed upside
down, all indicators will light.
• When the information on the disc cannot be read correctly, for
example due to dust or dirt on the disc, the indicators will read as
shown below. Nothing will be shown on the TRACK N0. and TIME
displays, and it may take quite a while to read the disc.
1.
Playing a Specific Track .................................. Direct Search
Use the number buttons and the +10 button to input the number of the
desired track.
For example, to play track number 4, press 4, and to play track
number 12, press +10 and 2 . Playback will begin from that track.
Press the Automatic search forward button during
playback.
• The pickup will advance to the beginning of the next track and
playback will continue. Pressing the button several times will forward
the pickup the corresponding number tracks.
3. Returning to the beginning of the
current track during playback ......................... Automatic Search
10
Press the Automatic search reverse button during playback.
• The pickup will return to the beginning of the current track and
playback will continue. Pressing the button several times will return
the pickup the corresponding number tracks.
Press the PROG/DIRECT button so that the
PROG indicator lights, then
use the number buttons and the +10 button to program the tracks.
For example, to program tracks 3, 12, and 7, press
PROG/DIRECT , 3, +10,
[2,
and 7.
The corresponding track number lights on the calendar each time a
track is programmed, the track number is displayed on the TRACK
display, the number of tracks programmed is displayed on the
CALENDAR display, and the total playing time of the programmed
tracks is displayed on the TIME display. A few seconds after the last
track has been programmed, the total number of tracks programmed
is displayed on the TRACK display and the total playing time of the
programmed tracks is displayed on the TIME display.
2. Advancing to the next track
during playback ................................................Automatic Search
4.Playing Specific Tracks in a
Specific Order ................................................... Programmed Play
• With this function, you can choose any of the tracks on the disc
and program them to play in any order.
• Programming is possible with the disc holder open.
• Up to 20 tracks can be programmed.
• The programmed tracks are shown on the calendar.
(1) Programming
To Next Page
Loading...
Need help?
Audio Functions and Display
