ENGLISH
21
2
3
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE: For some menus, the initial values can be changed during playback.
DISC SETUP
Use this to set the language to be used when playing the disc. If the set
language is not offered on that disc, the discs default language is set.
OSD SETUP
Use this to set the language for the default setting screen and messages
displayed on the TV screen (“PLAY”, etc.).
VIDEO SETUP
Use this to set the DVD-2900’s screen mode. (TV aspect and TV type.)
AUDIO SETUP
Use this to set the DVD-2900’s audio output mode.
(Digital and LPCM output settings.)
RATINGS
Use this to disable playback of adult DVDs so that children cannot watch
them. Note that playback of adult DVDs cannot be disabled if the rating
level is not recorded on the DVD.
OTHER SETUP
These include special settings CAPTIONS and COMPRESSION.
Use the
0
and
1
cursor buttons to select the desired setting item, then
press the ENTER button.
Select “DISC SETUP”. (See page 23.)
Select “OSD SETUP”. (See page 26.)
Select “VIDEO SETUP”. (See page 27.)
Select “AUDIO SETUP”. (See page 30.)
Select “RATINGS”. (See page 34.)
Select “OTHER SETUP” (See page 36.)
✽
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button
on the remote control unit.
1
Turn on the power.
• Press the power button, the power indicator lights and the power turns
on.
To Next Page
Loading...
Need help?
General
