Denon RCD-CX1 User Manual

Getting Started Setting the Timer Other Functions Troubleshooting
ENGLISH
Specifi cations

[MENU/SET]
[2/u]
[5/ENTER]
[8/i]
[TIME/DISPLAY]
ON/STANDBY
ON/STANDBY
Button located on both the main unit and the remote control
unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
GExampleH Setting the current time to 10:15 am
1
Press ON/STANDBY to turn the power on.
2
Press and hold in [TIME/DISPLAY].
The time is displayed.
3
Press and hold in [MENU/SET] to enter time setting
mode.
“TIME Adj” is displayed for about 2 seconds.
4
Use [2/u] or [8/i] to set the “hours”.
5
Press [MENU/SET] or [5/ENTER].
The “minutes” display fl ashes.
6
 Use [2/u] or [8/i] to set the “minutes”.
7
Press [MENU/SET] or [5/ENTER].
The current time is set, and the normal display reappears.
TIM E AdjTIM E Adj
10:0 010:0 0
10:0 010:0 0
10:1 510:1 5
n Checking the current time when the power is on
Press and hold in [TIME/DISPLAY].
Press once more and the display returns to its original condition.
n Checking the current time when the power is set
to standby
Press [TIME/DISPLAY].
Press once more, and the standby display is resumed.
Displaying the time when the power is set to standby consumes
electricity. To reduce electric consumption, turn the time display off.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.
Connections Setup Playback
Setup
Setting the Current Time
(24-Hour Display)
1.RCD-CX1_ENG.indd 13 2008/05/30 11:20:18

Denon RCD-CX1 Specifications

General

Brand	Denon
Model	RCD-CX1
Category	Car Receiver
Language	English