DeWalt D25981 User Manual

7
ENGLISH
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the ratingplate.
Your
DeWALT
tool is double insulated in accordance
with IEC60745; therefore no earth wire isrequired.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the
DeWALT
serviceorganisation.
Mains Plug Replacement
(Middle East and Africa)
If a new mains plug needs to be fitted:
• Safely dispose of the oldplug.
• Connect the brown lead to the live terminal in theplug.
• Connect the blue lead to the neutralterminal.

WARNING: No connection is to be made to the
earthterminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data). The minimum conductor size is 1.5 mm
2
; the
maximum length is30m.
When using a cable reel, always unwind the cablecompletely.
Package Contents
The package contains:
1 Breaker
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Date Code Position (Fig. A)
The date code
19
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
On/off switch
2
Side handle(s)
3
Tool retainer
4
Tool holder
5
Handle screws
6
Air vents
Optional accessories (Fig.C)
Various types of 28 mm hex. chisels are available as anoption.
7
Pointed chisel
8
Cold chisel
9
Scaling tool
10
Spade chisel
11
Asphalt cutter
12
Driver ground rod
13
Shank tamper
14
Plate tamper
Consult your dealer for further information on the
appropriateaccessories.
Intended Use
Your breaker has been designed for professional heavy duty
demolition, chipping and chasing applications in concrete, brick,
stone and other masonrymaterials.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
These demolition hammers are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Soft Start Feature
The soft start feature allows the impact rate to build up more
slowly, thus preventing the chisel or point from “bouncing”
around on the masonry when startingup.
Fully Vibration-dampened Handles (Fig. A)
The dampers in the handles
2
absorb the vibrations
transmitted to the user. This improves user comfort during
theoperation.
Active Vibration Control
The active vibration control neutralises rebound vibration from
the hammer mechanism. Lowering hand and arm vibration,
it allows more comfortable use for longer periods of time and
extends the life of theunit.

DeWalt D25981 Specifications

General

Brand	DeWalt
Model	D25981
Category	Power Tool
Language	English