ConnectPort LTS regulatory information and certifications Safety statements
Digi ConnectPort LTS User Guide
163
4. Circuit Overloading: Consideration should be given to the connection of the equipment to the
supply circuit and the effect that overloading of circuits might have on over-current protection and
supply wiring. Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
5. Reliable Earthing: Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch
circuit.
Lithium Battery
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
(Manufacturer: SONY FUKUSHIMA CORP., Model: CR2032.)
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE OR RECYCLING
PROGRAM.
Modem
CAUTION! To reduce the risk of fire, use only No. 26AWG or larger telecommunication
line cord.
Cabling
To determine the proper cable requirements for your application, please refer to the Cable Guide for
all PortServer® TS, Digi Connect®, and Digi One® Products (Digi part number 90000253).
To Previous Page
Loading...
Need help?
General