Chapter 2
Configuring the IP Address 13
Configuring the IP Address with Setup
This procedure describes how to configure an IP address
using Setup, an application you can find on the CD that came
in your device server package.
Prerequisites
This procedure assumes the following:
• That the device server is connected to the network and
powered up
• That the CD will be used on a Microsoft Windows system
Procedure
1. Record the device server’s MAC address.
2. Insert the Digi CD in the CD drive.
3. If the CD does not start automatically, double-click My
Computer and then the CD icon.
4. Choose Configure Device.
The Digi application finds and lists all of the Digi devices
on your network.
5. Locate your device server by it’s MAC address.
6. Select the device server and then choose Configure.
7. Log into device server with the user name of root and the
root password. The default root password is dbps.
8. To navigate to the network configuration, choose Config-
ure > Network.
9. Use the Network Configuration page to assign the IP
address and other network-related values.
To Next Page
Loading...
Need help?
General