57
• Turn either function keys <2, 3 or 4> to assign a CC
number to the selected Expression pedal .The display
will appear like this if, for example Exp 1 is selected.
(Exp1=Internal Expression pedal on 2112 w/o Control
One. Or, Internal Expression on the Control One when
connected.The display now reads:
• Press the <Utilities> button to exit.
• For a complete explanation of Expression Pedal names,
please refer to page 52.
CC Transmit Channel - This option allows you to set
the MIDI channel on which CCs will be sent out the
2112 MIDI Out port to other MIDI devices. If you are
using the Control One for the 2112 only, you don't need
to worry about setting up this option.
However, if you plan to use the Control One for continu-
ous control over other MIDI devices (either in conjunc-
tion with the 2112 or by themselves), you need to assign
a MIDI transmit channel for each of the CC numbers
you'll be using for continuous control of the other
devices.
To change the MIDI channels on which the selected
CCs will transmit to other MIDI devices, do the fol-
lowing:
• Press the <Utilities> key once.The display reads:
•
T
urn <Page> knob until the displa
y reads:
• Turn function knob <4> to select the MIDI CC transmit
channel. For example, use select channel 10 and the dis-
play will now appear like this:
• To exit the Transmit channel assignment, press the
<Program> button.
To Next Page
Loading...
Need help?
General
