INITIAL STARTING-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a mains voltage of
230V/50Hz
.
AMPLIFIER CONNECTION
Connect audio plugs to Alert input on your mixer or amplifier:
Red plug into R/H channel input.
White plug into L/H channel input.
Playing a record
- Place the record of your choice on the turntable. If it is a 45rpm, do
Not forget to place the adaptor on the record spindle.
- Choose the desired playing speed using the Speed select switch
between 33.3, 45 and 78rpm.
- Turn on the Rotary Power Switch.
- Release the tone arm lock.
- Push in the arm with your hand lightly.
- Place the stylus vertically over the first track of the record the
turntable will start turning automatically.
- Put down the cartridge slowly to the record then the turntable will play.
- When a record comes to the end, the turntable will stop automatically if the
Auto-stop switch is in the ON position. If the switch is in the off position then
it will be suitable for Long Play records.
NOTE:
- Lift up the tone arm and put it on the rest.
- Replace the protective cap on the stylus and close the tonearm lock.
- Turn off power at mains.
4
To Next Page
Loading...
Need help?
General
