DigiTech RP 3 User Manual

Section 5 - Appendix
Reinitializing the RP-3
This option allows you to restore the contents of the RP-3’s memory to the original factory condition and to calibrate the expression pedal.
WARNING: Performing this function will destroy all user-programmed data. All such data will be lost forever!
To restore the factory Programs, the procedure is as follows:
1. Plug in the RP-3 while holding down the Parameter Select <UP> button.
2. When: rS appears in the display window, press the Value <UP> button
3. The display will now prompt you to calibrate the Expression pedal by reading: Pd and CA.
4. When the display reads: to...dn, rock the pedal forward and press any one of the <1-3> footswitches.
5. When the display reads: to...UP, rock the pedal back and press any one of the <1-3> footswitches. The expression pedal
will now be calibrated and the RP-3 will return to program mode.
Recalibrating the Expression Pedal
If the expression pedal should for some reason need to be recalibrated, you can recalibrate by disconnecting the power, press and hold the
Parameter select <DOWN> button and repeat steps 3-5 as shown in the Re-intialializing the RP-3 section above.
Harmony Interval Chart
üOct
ü6th
ü5th
ü3rd
Ref
¨3rd
¨5th
¨6th
¨Oct
Major
C
A
G
E
C
A
F
E
C
C
A
b
G
E b
C
A b
F
E b
C
H1 H2 H3 H4 H5 H6
C
A
b
G
E b
C
A b
F
E b
C
C
A
G
E b
E b
C
A
F
E b
C
C
A
G
E
C
A
F
E
C
C
G
4th (Blues Only)
C
G
F
C
Minor Harm.Minor Dorian Mixolydian BluesInterval
Section - 5 Appendix
RP-3
User Guide
18

DigiTech RP 3 Specifications

General

Brand	DigiTech
Model	RP 3
Category	Computer Hardware
Language	English