DigiTech VOCALIST LIVE 4 User Manual

24
Factory Reset
If you want to restore the Vocalist
®
Live 4 to the state it was in when first delivered, you can use
the Factory Reset function. This will:
Copy all Factory presets to the corresponding User presets, overwriting all changes you
may have made to the user presets
Restore the state of the Utility parameters to the factory defaults (FXFS ALL, HARMFS
TOG, GTRSENS LO)
Set the Stereo/Mono state to Stereo
To perform a Factory Reset procedure
If you are editing a preset, press the Up or Down footswitch to exit edit mode.
Press and hold the Major/Minor button and then press and release the Store button.
The display will read FAC RESET- WILL ERASE ALL YOUR PRESETS... , then
STORE=RST.
Press the Store button again to continue with the factory reset. If you don’t want to do
the factory reset, just wait 5 seconds, or press almost any other button, to cancel.
•
•
•
1.
2.
3.

DigiTech VOCALIST LIVE 4 Specifications

General

Brand	DigiTech
Model	VOCALIST LIVE 4
Category	Computer Hardware
Language	English