To enable or disable voice editing of intervals:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the User softkey.
3. Press the Right Arrow button.
4. Use the Data Wheel to toggle voice editing of intervals on or off as
desired.
5. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
Synthesizer Mode
The Vocalist Workstation EX includes an on-board synthesizer that has
two modes of operation:
¥ It can provide a cue-in note to help you find a starting pitch to sing to.
¥ It can assist you in auditioning and editing programs.
Upon entering the Synthesizer screen (see below) and the synthesizer is
set to Off, you can press a note on the front panel keyboard and a single
cue-in note will be produced at the outputs. This feature is only available
within Utilities mode.
When you set the internal synthesizer to On, you can return to Programs
mode and press any note on the front panel keyboard to play the note
through the Vocalist Workstation EXÕs pitch shifters. This will allow you
to hear the harmonies currently defined for that note within the current
program.
You can also adjust the output volume of the synthesizer if desired. The
default volume level is -6 dB.
To activate the internal synthesizer:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Synth softkey.
3. Use the Data Wheel to toggle the synthesizer tone on or off as desired.
4. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
To adjust the synthesizer volume:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Synth softkey.
3. Press the Right Arrow button.
48
To Next Page
Loading...
Need help?
General
