SPECIFICATIONS
Microphone Input Balanced XLR, 1 KOhm impedance, cardoid (directional) type preferred
Line Input Balanced or unbalanced 1/4" TRS, +4/-10 dB level (switchable), 2.2
KOhm impedance
Microphone Input Range @ 150 Ohm source impedance: minimum -42.1 dBu, maximum -3.2 dBu
Line Input Range Balanced input @ 50 Ohm source impedance: maximum +18.0 dBu
Line Outputs Balanced or unbalanced 1/4" TRS, stereo or mono, +4 dBu (can be
reduced by trimming Output Level fader)
Maximum output level +16 dBu
Sampling A/D: 18 bit @ 48 KHz
Frequency Response (dry) 15 Hz to 20 KHz, +0/-1 dB
Signal to Noise >92 dB ÒAÓ weighted
Total Harmonic Distortion 0.032%
+ Noise
Power Requirements Input voltage = 9.75 VDC
Input current = 820 mA
Use only Harmon Pro Group PS750 adaptor or exact equivalent
Size 6.6" H x 10.5" W x 1.7" D
167 mm H x 267 mm W x 43 mm D
Weight 1.5 lb.
.7 kg.
Internal Lithium Battery Sony CR2032
Note: The lithium battery in the Vocalist Workstation EX keeps a portion
of the memory powered to retain user settings. If you find that user pro-
grams or songs cannot be stored, or are lost when the Workstation is
turned off, this may be due to a dead battery. Take the Workstation to a
DigiTech dealer or service centre to have the battery replaced. In normal
use, a battery should last three to five years.
60
To Next Page
Loading...
Need help?
General
