- 2 -
An added feature of the Weather Station is the readout of all measured and displayed time and weather
data on a PC.
Important Operation Notes
All actions and functions of the weather station are started on the touch screen by slightly touching (not
pressing!) the related areas, touch the flashing +, ON/OFF or – to make the corresponding selection
or increase the value.
Every time a programming step is activated by touching a switching area on the Touch Screen a tone will sound,
and the back light is switched on for a few seconds as well.
If no areas are pressed for 30 seconds, the LCD will automatically revert to the normal display mode (automatic
time out).
To Next Page
Loading...
Need help?
General
