DigiTech XC0348 User Manual

- 7 -
outdoor temperature
Activate the outdoor temperature related setting by
1)Touch the OUTDOOR TEMPERATURE section, + button and – button will be flashing. Touch the +
button or – button to Shift the display between Outdoor Temperature, Wind Chill and Dew Point.
2)Touch the OUTDOOR TEMPERATURE section again, + button and – button will be flashing. Touch
the + button or – button to Shift the display unit between ℃ and ℉
3)Touch the OUTDOOR TEMPERATURE section the third time to set the outdoor temperature high
alarm function, the +, ON/OFF and – button will be flashing, HI AL icon will light up. Touch the+
button or – button to change the value, hold the+ button or – button for 3s to change the number in
great step. Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker
icon will be turned on indicating the alarm function has been enabled).
4)Touch the OUTDOOR TEMPERATURE section the fourth time to set the outdoor temperature low
alarm function, the +, ON/OFF and – button will be flashing, LO AL icon will light up. Touch the+
button or – button to change the value, hold the+ button or – button for 3s to change the number in
great step. Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker
icon will be turned on indicating the alarm function has been enabled).
5)Touch the OUTDOOR TEMPERATURE section the fifth time to display maximum outdoor
temperature record, the recorded maximum value will be flashing, MAX icon will light up. Hold the
flashing max value for 3s, the maximum value will be reset to current reading.
6)Touch the OUTDOOR TEMPERATURE section the sixth time to display minimum outdoor
temperature record, the recorded minimum value will be flashing, MIN icon will light up as well. Hold
the minimum value for 3s, the minimum value will be reset to current reading.
Indoor humidity

DigiTech XC0348 Specifications

General

Brand	DigiTech
Model	XC0348
Category	Weather Station
Language	English