13
Appendix
Safety Instructions
General
This product is for indoor use only.
Please read all instructions and use them for future reference.
Please follow all warnings and instructions on the device.
Do not place the device on any uneven surface (such as a cart, shelf, table, etc.).
If the device is dropped, it will be made.
Serious damage.
Do not use the device near water.
Do not place this unit near or above the radiator or heating unit.
The device housing is equipped with slots for heat dissipation and ventilation.
To prevent overheating during operation, do not block or cover the openings.
This device should not be placed on a soft surface (such as a bed, sofa, blanket,
etc.), which would block the fan opening and should not be placed in a sealed
environment unless proper ventilation has been provided.
Do not spill any liquid on the device.
The power of this unit must be removed from the wall outlet before cleaning.
Do not use any liquid or foamy cleaning agent. Please use a damp cloth to clean it.
Please use the device according to the type of power supply on the label. If you
are not sure if the power type is available, please contact your dealer or local
power company.
This equipment is designed for IT power distribution systems with phase-to-phase
voltages from 100V to 230V .
To prevent damage to your device, it is important that all equipment is properly
grounded.
Do not place anything on the power cord or cable, and arrange the power cord
and cable routing to avoid tripping over it.
If the device uses an extension cord, make sure that the total charge of all
products using the cord does not exceed the current carrying capacity of the
cord. Ensure that the total of all products plugged into the wall outlet is not more
than 15 A.
To Next Page
Loading...
Need help?
General
