Digitus DS-12891 User Manual

9
Chapter 3
Basic operation
Overview
There are two ways for the KVM switch to access the connected computer: the
combination hotkey on the USB keyboard to switch operations or the manual switch
operation on the front of the KVM device.
Manual switching method
The user only needs to press the corresponding touch button on the front panel
of the KVM , and the buzzer will sound a tone indicating that the switch port is
successful, and the USB , audio and video signals of the corresponding port will be
switched to the corresponding port on the local port.
Hotkey switching method
Users can use the keyboard connected to the USB interface on the KVM device
to perform hotkey operation. For details, please refer to the detailed description in
the following sections.
Power off and restart
If it is necessary to turn off the power to the device, before turning the device back
on, you must do the following:
1. Unplug the data cable from all the computers connected to the switch.
2. Unplug the power adapter cable from the switch if there is.
3. Wait 10 seconds, if there is power, plug the power adapter cable back into
the switch.
4. Then connect the computer data cable and turn on the computer.

Digitus DS-12891 Specifications

General

Brand	Digitus
Model	DS-12891
Category	Switch
Language	English