Ditch Witch RT80 User Manual

RT80 Operator’s Manual Drill - 93
Drill
CMW
Drill
1. Pull selector valve upward to select drill mode (if applicable).
2. Start engine and begin clockwise (forward) rotation.
3. Slowly advance machine while maintaining clockwise rotation.
IMPORTANT: For location and description of drilling controls see page 29.
EMERGENCY SHUTDOWN: Release all controls and turn ignition switch to OFF position.
NOTICE:
• Drilling too quickly causes bit to drift off course and may bend drill rod. After bore path is
established, speed may be slightly increased.
• If drill rod starts to bend, stop forward movement of unit and back the unit slightly until rod
straightens. Do not drill with bent rod.
• If drill rod hits an obstruction, rotate drill string counterclockwise to back up slightly.

Ditch Witch RT80 Specifications

General

Brand	Ditch Witch
Model	RT80
Category	Industrial Equipment
Language	English