dji RC Motion 2 User Manual

DJI RC Motion 2 User Manual
©
2023 DJI All Rights Reserved.
15
Firmware Update
Use one of the following methods to update the firmware.
Using DJI Fly App
Power on the aircraft, goggles, and motion controller. Make sure all the devices are linked.
Connect the USB-C port of the goggles to your mobile device, run DJI Fly and follow the
prompts to update. Make sure your mobile device is connected to the internet during the
update.
Using DJI ASSISTANT™ 2 (Consumer Drones Series)
1. Power on the device. Connect the USB-C port of the device to the computer using a
USB-C cable.
2. Launch DJI Assistant 2 and log in with a DJI account.
3. Select the device and click
Firmware Update
on the left side of the screen.
4. Select the firmware version.
5. The firmware will be downloaded and updated automatically.
6. The device will restart automatically after the firmware update is complete.
• Make sure the computer is connected to the internet during the update.
• Make sure the device has sufficient power before updating the firmware.
• Make sure to follow all the steps to update the firmware, otherwise the update
may fail.
• The firmware update will take several minutes. Please wait patiently for the
firmware upgrade to complete.
• Do not unplug the USB-C cable during the update.
• Note that the update may reset the parameters. Before updating, take note of
your preferred settings and reconfigure them after the update.

dji RC Motion 2 Specifications

General

Brand	dji
Model	RC Motion 2
Category	Remote Control
Language	English