dji RC Motion 2 User Manual

DJI RC Motion 2 User Manual
©
2023 DJI All Rights Reserved.
5
Overview
1
2
6
7
3
8
4
9
5
1. Battery Level LEDs
2. Lock Button
Takeoff: press twice to start the aircraft motors, then press and hold to make the
aircraft take off. The aircraft will ascend to approximately 1.2 m and hover.
Landing: while the aircraft is hovering, press and hold to land the aircraft and stop the
motors.
Brake: press once to make the aircraft brake and hover in place. Press again to unlock
the attitude.
When the aircraft is performing RTH or auto landing, press the button once to cancel
RTH or landing.
3. Joystick
Toggle up or down to make the aircraft ascend or descend. Toggle left or right to make
the aircraft move horizontally left or right.
4. Mode Button
Press to switch between Normal and Sport mode. Press and hold to initiate RTH. Press
again to cancel RTH.
5. FN Dial
Press the dial to open the camera settings panel in the FPV view. Scroll the dial to
navigate the settings menu or adjust the parameter value, then press the dial to
confirm the selection. Press and hold the dial to exit the current menu.
Use the FN dial to control the camera tilt before takeoff or during RTH and landing.
Press and hold the FN dial from the FPV view and then scroll up or down to tilt the
camera. Release the dial to stop the camera tilt.
10

dji RC Motion 2 Specifications

General

Brand	dji
Model	RC Motion 2
Category	Remote Control
Language	English