dji RC Motion 2 User Manual

DJI RC Motion 2 User Manual
©
2023 DJI All Rights Reserved.
9
1 Press and hold the power button on the aircraft until the battery level LEDs start to
blink in sequence.
2 Press and hold the power button on the motion controller until the controller beeps
continually and the battery level LEDs blink in sequence.
3 The motion controller stops beeping once linking is successful, and both the aircraft
and motion controller battery level LEDs turn solid and display the battery level.
• The aircraft can be controlled with only one remote control device during flight. If
your aircraft has been linked with multiple remote control devices, turn off other
control devices before flight.
Activation
When all devices are powered on and linked, connect
the USB-C port of the goggles to the mobile device
and run the DJI Fly app. The app will automatically
identify the DJI RC Motion 2 and activate it in silent
mode.
Activate the device as soon as possible after
purchase to avoid affecting the after-sales service.
Controlling the Camera
Shutter/Record Button
FN Dial
FN Dial
Adjusting the camera parameters: press the dial to open the camera settings panel from
the FPV view of the goggles. Scroll the dial to navigate the settings menu or adjust the
parameter value, then press the dial to confirm the selection. Press and hold the dial to
exit the current menu.
DJI Fly
App

dji RC Motion 2 Specifications

General

Brand	dji
Model	RC Motion 2
Category	Remote Control
Language	English