Connect Panel Intended use
11
3 Intended use
Connect Panel serves for the central monitoring and control of CI BUS-based vehicle
technology in recreational vehicles.
4 Technical description
Connect Panel is a central control unit for consumer units in recreational vehicles and
accessories such as data collectors, field distributors, heaters, air conditioners or
chargers.
The control unit is operated using three sensor buttons and a touchscreen. The
touchscreen is also used to display status information.
CI BUS-based vehicle technology sends information and receives operator and con-
trol commands. The open system supports CI BUS-based vehicle technology from a
variety of different accessory manufacturers.
You can find the exact number of supported devices on the website of the vehicle
manufacturer:
• Temperature sensors
•Battery sensor
• Battery chargers
• Air conditioner
• Heating system
• Fresh water and gray water tanks
The inside air temperature sensor can be directly connected to the display.
The mains voltage supply for the caravan can be switched on and off using the main
switch.
The software for the system control is updated using a microSD card.
ConnectPanel -O-8s.book Seite 11 Dienstag, 31. März 2020 6:13 06
To Next Page
Loading...
Need help?
General
