50
EN
Disposal Americana and New Generation Refrigerators
8.45 Replacing the Water Valve
44 Disconnecting the Water Valve
q
Water Lines
e
Screws
w
Mounting Bracket
r
Water Valve
1. Disconnect the unit from all power sources (120VAC
and 12VDC).
2. Shut off the water supply to the refrigerator.
3. Disconnect the wires to the water valve.
4. Disconnect the water line to the ice maker.
5. Remove the screws securing the water valve to the
mounting bracket.
6. Remove the defective water valve.
7. Perform these steps in reverse with the new water
valve to complete the replacement.
9 Disposal
M
Place the packaging material in the appropriate
recycling waste bins, whenever possible. Consult
a local recycling center or specialist dealer for
details about how to dispose of the product in
accordance with all applicable national and local
regulations.
10 Replacement Parts
For the most current parts information, visit www.
dometic.com.
r
q
e
w
To Next Page
Loading...
Need help?
General
