RC10.4 70, RC10.4 90 Operation
23
8.2 Using the refrigerator
The fridge device conserves fresh foodstuffs. You can also conserve frozen foodstuffs
in the freezer compartment.
A
➤ Switch the cooling device on by pressing the button for five seconds.
➤ Press the button, until the LED for the desired operating mode (chapter
“Operating and display elements” on page 19) lights up.
I
Setting the temperature (PERFORMANCE and SILENT MODE only)
You can set the temperature using the button.
➤ Press the button repeatedly until the desired temperature is set.
✓ The display shows the selected temperature:
– one bar = lowest cooling capacity
– three bars = medium cooling capacity
– five bars = highest cooling capacity
I
Conserving foodstuffs
You can conserve foodstuffs in the cooling device compartment. The time for which
the food can be conserved in this way is usually stated on the package.
NOTICE!
Ensure that food or liquids in glass containers are not excessively
refrigerated.
Liquids expand when they freeze and can thus destroy the glass
containers.
Ensure that the objects placed in the cooling device are suitable for
cooling to the selected temperature.
NOTE
After switching on, the cooling device requires approx. 60 s until the
compressor starts up.
NOTE
The cooling capacity can be influenced by:
•
The ambient temperature
•
The amount of food to be conserved
•
The frequency with which the door is opened
•
Adequate ventilation
RC10.4-IO-EN-DE-FR-NL.book Seite 23 Montag, 10. September 2018 11:15 11
To Next Page
Loading...
Need help?
General
