Cleaning and maintenance RC10.4 70, RC10.4 90
26
9 Cleaning and maintenance
A
➤ Clean the cooling device regularly as soon as it becomes dirty with a damp cloth.
➤ Make sure that no water drips into the sealings as this water can damage the
electronics.
➤ Wipe the cooling device dry with a cloth after cleaning.
10 Guarantee
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
11 Disposal
A
➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
NOTICE!
•
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
•
Never use brushes, scouring pads or hard or pointed tools to
remove ice or to loosen objects which have frozen in place.
NOTICE!
When disposing of the device, make sure it is not overheated, as the
insulating foam was made with flammable gas.
RC10.4-IO-EN-DE-FR-NL.book Seite 26 Montag, 10. September 2018 11:15 11
To Next Page
Loading...
Need help?
General
