Dometic RM24A User Manual

45
Fig. 15
i
i
.
/
/ i.
&l,/ ’
/
,,, ’
g ,.,’
,
/’
Fig. 76
.
&!I!
_-
To replace flint, follov these steps:
1.
Remove the
2.
Remove the
3.
Remove cap
outer burner shield by means of loosening the
two screws A (Fig. 75).
lighter by loosening the screw B retaining the lighter (Fig, 76).
C and remOve the spring D and tap out any remaining piece of flint
__ .
and fit a nev flxnt.
Be sure not to lose the small helical spring vhich presses the flint against
the serrated wheel.
Replacement of the serrated vheel - RM24
If after several years of use the lighter does not function properly even with a
new flint,the serrated vheel might be worn out and needs to be replaced.
1.
Release the lighter as described above.
2.
Unscrew the rod from the serrated wheel and fit a new wheel.
CAUTION :
The rod has to be unscrewed anti-clockwise.
41.
PIEZO LIGHTER (Fig. 77)
Fig. 77
The RM36C, RM46, RM47, RM66, RM67, RM76 and RM77 models are equipped with a Piero
crystal lighting device vhich creates a spark over the burner when the button E is
pushed in fully (see fig. 72).

Dometic RM24A Specifications

General

Brand	Dometic
Model	RM24A
Category	Refrigerator
Language	English