Technical description SinePower
10
5 Technical description
The inverters can be used anywhere where there is a 12 Vg or 24 Vg voltage
source. The inverters are connected to:
• Vehicle socket: MSI212 (12 Vg), MSI224 (24 Vg)
• Vehicle battery: MSI412 (12 Vg), MSI424 (24 Vg)
Devices MSI412 and MSI424 can be switched on and off optionally using an
external switch.
The devices are additionally cooled with a load and temperature-dependent fan
(fig. 2 2, page 4).
The maximum constant output for the devices is as follows:
• For inverters MSI212 and MSI224 150 W
• For inverters MSI412 and MSI424 350 W
Never connect devices that have a higher power requirement.
I
If the system has a short circuit, the device switches off.
If the voltage is too high, the device switches off and must be restarted manually.
If the input voltage is too high or too low or the system overheats, the device
switches off and then on again after a short while.
NOTE
Note when connecting devices with an electrical drive (such as power
drills and refrigerators), that they often need more power than is stated
on the type plate.
MSI200-MSI400-IO-16s.book Seite 10 Freitag, 27. Oktober 2017 9:59 21
To Next Page
Loading...
Need help?
General