dock) before cleaning to avoid power failure, items or wire damage caused by
the robot during cleaning.
If cleaning is complete in less than 10 minutes, F9 will cleaned twice by default.
6． How does Dreame F9 return to dock for charging?
A： After cleaning, F9 will automatically return to the dock for charging， in
pause status, press the dock button for charging, the buttons will flash slowly
when charging. Power ≤ 15% is indicated by orange flashes, power > 15% is
indicated by white flashes.
Tip: If the F9 fails to return to dock, it will automatically return to the starting
point of cleaning. Please manually put the robot back to the dock for charging.
7． How to clean the main brush of Dreame F9?
A：
1. Face the bottom of F9 up, press the buckle to remove the main brush
protector.
2. Take out the main brush by pulling upward and clean the bearing.
3. Remove the end cover at both sides of the main brush to clean the tangled
hair.
4. Cut off the tangled hair on the main brush with the cleaning tool in the box.
5. Install the main brush and press the buckles to fix the protector.
Tip: It is recommended to clean the main brush every week and replace every
To Next Page
Loading...
Need help?
General
