Dreame M12 User Manual

1
2
1616
EN
1.First, press the brush roller cover
release buttonsinwardson both sides
to remove the brush roller cover.Next,
press the brush roller release
buttonandthe handle of the brush
roller will pop out. Pull the handle to
take out the brush roller.
2. Clean out any hair and debris tangled
on the brush roller with the provided
cleaning brush. Rinse the brush roller
with clean water and dry it completely.
* Clean as needed.Alternatinguse of the two provided brush rollers is recommended.
* Replacing the brush roller every 3 to 6 months is recommended.
1
2
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
4. After cleaning the brush roller, re-install
the brush roller and the brush roller cover.
You will hear a click to indicate that they
are installed in place.
CareandMaintenance
Cleaning the Brush Assembly

Dreame M12 Specifications

General

Brand	Dreame
Model	M12
Category	Vacuum Cleaner
Language	English