To Next Page

To Previous Page

The appliance is powered on in Auto modeby default, you can switch to Suction

modeas needed.

Auto Mode

While washing the oor, the appliance can adjust its suction

poweraccording todierent situations.

Suction Mode

If Suction mode is selected, the appliance will vacuum water only and the

brush roller will not be dampened. No water is coming out of the Clean

Water Tank.

Standard Mode (Handvac)

When the appliance converts to a handheld vacuum, it is powered on by

default in Standard mode.

Turbo Mode (Handvac)

Press the handvac mode switch to select the Turbo mode.

1. Fill the Clean Water Tank: Press the Clean Water Tank release button to remove the

tank. Open the tank cover and ll the tank with clean water. Re-install the Clean Water

Tank and ensure it clicks into place.

Note:

•

For better cleaning performance, it is recommended to add 10ml detergent with the bottle cap into the full Clean

Water Tank, then shake gently and evenly for use.

•

Do not add any liquids other than the ocially-approved cleaner.

Using asaFloor Washer

How to Use

Working Modes

Dreame M12 User Manual

Other manuals for Dreame M12