Dreame VVA1 User Manual

16 17
EN EN
Care & Maintenance
Cleaning the Cyclone Assembly
1. Rotate the cyclone assembly in the direction as illustrated to unlock it, then
remove the cyclone assembly.
Note: Use the 2-in-1 crevice nozzle to remove cyclone separator from the housing.
Turn the nozzle in the direction as shown in the diagram for a thorough cleaning.
2. Rinse the cyclone assembly with water until it is clean. Thoroughly dry the cyclone
assembly.
Note: Keep it in a ventilated or cool place for at least 24 hours.
Care & Maintenance
Cleaning the HEPA Filter Assembly
1. Place the vacuum securely on a at surface, then turn the HEPA lter assembly
cover in the direction indicated and remove the HEPA lter assembly.
Note: Remove the built-in foam pad before cleaning the HEPA lter assembly.
2. Rinse the HEPA lter and foam pad with water. To thoroughly remove all the dust
caught in the lter, rotate the HEPA lter by 360 degrees while rinsing. Lightly tap the
lter against a sink several times to remove any excess debris. Keep the HEPA lter in
a well-ventilated and cool place to fully dry.
Note: Fully dry the lter (at least 24 hours) before reinstalling it.
2
3
1
12
6
111
57
210
48
39
24 hrs
1
2
3
3
12
6
111
57
210
48
9
24 hrs

Dreame VVA1 Specifications

General

Brand	Dreame
Model	VVA1
Category	Vacuum Cleaner
Language	English