140
Driving
06
The warning is given by a fixed warning lamp that
appears in the door mirror on the side in question:
– immediately, when being overtaken;
– after a delay of about one second, when
overtaking a vehicle slowly.
Activation/Deactivation
The function is activated and deactivated
in the Driving/Vehicle menu of the touch
screen.
The state of the system stays in the memory when
switching off the ignition.
The system is automatically deactivated
when towing with a towing device
approved by the Manufacturer.
Conditions for operation
– All vehicles are moving in the same direction
and in adjacent lanes.
– The speed of your vehicle must be between 7
and 87 mph (12 and 140km/h).
– When overtaking a vehicle, the speed
difference is less than 6mph (10km/h).
– When overtaken by a vehicle, the speed
difference is less than 16mph (25km/h).
– Traffic is flowing normally.
– Overtaking a vehicle over a certain period of
time and the vehicle being overtaken remains in
the blind spot.
Operating limits
The system goes into standby automatically in
the following cases:
– ESC deactivated or operation triggered,
– speed below 40 mph (65km/h) or greater than
112 mph (180km/h),
– electrical connection of a trailer,
– use of the "space-saver" spare wheel detected
(as detection is not immediate, deactivation of
the system is recommended),
– dynamic driving style detected, pressure on the
brake or accelerator pedal,
– driving where there are no lane markings,
– activation of the direction indicators,
– crossing the inside line on a bend,
– driving in a tight corner,
– inactivity by the driver detected during
correction.
The following situations may interfere
with the operation of the system or
prevent it from working:
– insufficient contrast between the road
surface and the shoulders (e.g. shade),
– lane markings worn, hidden (snow, mud) or
multiple (roadworks, etc.),
– running close to the vehicle in front (the lane
markings may not be detected),
– roads that are narrow, winding, etc.
Risk of undesirable operation
We recommend deactivating the system in the
following driving situations:
– driving on damaged, unstable or very slippery
(ice) road surfaces,
– unfavourable weather conditions,
– driving on a speed circuit,
– driving on a rolling road.
Deactivation/ Activation
► Press this button to deactivate / reactivate
the system at any time.
Deactivation is signalled by the lighting of
the indicator lamp in the button and this
warning lamp in the instrument panel.
The system is automatically reactivated every
time the ignition is switched on.
Malfunction
A fault with the system is signalled by the
illumination of these warning lamps in the
instrument panel, accompanied by the display of
a message and an audible signal.
Have the system checked by a dealer or a
qualified workshop.
Blind Spot Detection
Refer to the General recommendations on the use
of driving and manoeuvring aids.
This system includes sensors, placed on the
sides of the bumpers, and warns the driver of the
potentially dangerous presence of another vehicle
(car, truck, motorcycle) in the blind spot areas of
their vehicle (areas hiddenfromthe driver's field
of vision).
To Next Page
Loading...
Need help?
General
