EasyManuals Logo
Home>DS Automobiles>Automobile>DS 7 CROSSBACK

DS Automobiles DS 7 CROSSBACK User Manual

DS Automobiles DS 7 CROSSBACK
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
157
Practical information
07
The filler cap is built into the flap.
►  Take care to select the pump that delivers the
correct fuel type for the vehicle's engine (see a
reminder label on the inside of the filler flap).
►  Introduce the filler nozzle and push it in as
far as possible before starting to refuel (risk of
blowback).
►  Fill the tank.
Do not continue past the 3
rd
cut-off of the nozzle;
as this may cause malfunctions.
►  Push the filler flap to close it.
The vehicle is fitted with a catalytic converter, a
device which helps to reduce the level of harmful
emissions in the exhaust gases.
For petrol engines, you must use unleaded fuel.
The filler neck is narrower, allowing only unleaded
petrol nozzles to be introduced.
If you have put in the wrong fuel for the
vehicle, you must have the fuel tank
drained and filled with the correct fuel before
starting the engine.
Misfuel prevention (Diesel)
(Depending on country of sale.)
This mechanical device prevents filling the tank of
a Diesel vehicle with petrol.
Located in the filler neck, the misfuel prevention
device is visible when the filler cap is removed.
Operation
When a petrol filler nozzle is inserted into the
fuel filler neck of a Diesel vehicle, it comes into
contact with the flap. The system remains closed
and prevents filling.
Do not persist but introduce a Diesel type filler
nozzle.
It remains possible to use a fuel jerrycan
to fill the tank.
Travelling abroad
As Diesel fuel pump nozzles may be
different in other countries, the presence
of the misfuel prevention device may make
refuelling impossible.
Before travelling abroad, it is advisable to
check with a dealer if the vehicle is suitable
for the distribution equipment of the countries
visited.
Hybrid system
Electrical system
The electrical system of the hybrid system is
identified by orange cables and its elements are
marked with this symbol:
The hybrid engine uses a voltage of
between 240 V and 400 V. This system
may be hot during and after switching off the
ignition. Observe the warning messages on the
labels in the vehicle, especially in the flap.
Any work on or modification to the vehicle's
electrical system (battery, connectors, orange

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DS Automobiles DS 7 CROSSBACK and is the answer not in the manual?

DS Automobiles DS 7 CROSSBACK Specifications

General IconGeneral
BrandDS Automobiles
ModelDS 7 CROSSBACK
CategoryAutomobile
LanguageEnglish

Related product manuals