23
[3] Keypad Setup allows the user to adjust the backlighting and contrast of
the LCD4500 keypad. When this function is selected, the keypad setup
menu will appear on the keypad:
• Bright Control adjusts the level of back lighting on the LCD display
and the backlighting on the keys.
• Contrast Control adjusts the contrast of the lettering on the LCD
display.
Use the [<][>] keys to toggle through the 8 different settings, and press
[✱] to select the level of preference.
[4] Bell/Comm Test allows the end user to test the system. This option
activates the bells for 2 seconds and sends a test code transmission to
the monitoring station.
[5] Door Chime feature is enabled or disabled by pressing the [✱] key to
toggle from “N” to “Y” or “Y” to “N”. When the chime zone is activated,
the keypad will beep quickly 5 times. The “Beeping” on doors can be
eliminated temporarily by using zone bypass, only when the panel is
disarmed.
[6] Special Messages function enables 2 special event messages to be
displayed when one of the special events occurs.
The first message is “Fail to Arm”. It will be displayed if the user is
unable to arm the partition after entering a valid code, e.g. because of
activity on the zones.
The second message is “Alarm When Armed”. It will be displayed if an
alarm occurred during the previous armed period.
[7] User Call Up function must be enabled by the installer. The panel will
call the downloading computer when selected. The downloading
computer must be waiting for the panel to call before downloading can
be performed.
WALK TEST
[
✱✱
✱✱
✱]+[6]+[Walk Test Code] When Disarmed
The Walk Test feature allows the user to test if the detectors on a partition
are in proper working order. There are 4 options in the walk test menu. Press
[✱] to view and select the option.
[0] Local, No Bell [2] Local+Comm. Test
[1] Local Walk Test [3] Disable Walk Test
[0] Local, No Bell will not sound the bell when a zone is tripped and no
transmission will take place for the zone alarm. The zone alarms will be
logged to the event buffer and displayed in alarm memory.
To Next Page
Loading...
Need help?
General
