Some of the disc media might not be compatible with the optical disc
drive connected to your computer. You should therefore verify that the
optical disc drive supports the blank media you have chosen before
proceeding.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
2. Turn on your computer and allow it to load the Windows operating
system from the internal storage drive as normal.
3. Insert the first blank disc into the external optical disc drive tray, or
insert the USB Flash Memory into one available USB port.
4. Click Start -> All apps -> Windows Tools and double-click Control
Panel. In the Control Panel window, click System and Security ->
Security and Maintenance -> Recovery -> Create a recovery drive.
5. Follow the on-screen instructions to finish creating the Recovery
Media.
dynabook Recovery Wizard option in dynabook Maintenance Utility will
not exist if you restore the computer from the recovery media you created
by recovery drive creating option in Windows system.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:
Make sure that the AC adaptor is connected during the restoring
process.
Do not close the display panel during the restoring process.
When you reinstall the Windows operating system, the internal storage
drive will be reformatted and all data will be lost.
If your model has fingerprint function, before you reinstall the Windows
operating system, delete the registered fingerprints. Otherwise, the
same fingerprints cannot be registered after the reinstallation.
1. Load the Recovery Media into the external optical disc drive or insert
the recovery USB Flash Memory into one available USB port.
2.
Click Start -> (Power) and then select Restart.
3. Hold down the F12 key and then release this key just after the
computer is powered on.
4. Use the up and down cursor key to select the appropriate option from
the menu according to your actual recovery media.
User's Manual
2-15
To Next Page
Loading...
Need help?
General