Dynaudio Focus User Manual

Coaxial Output Connection
The Focus Primary speaker is fitted with a coaxial digital output that can be used to enable an alternative wired
connection to the Client speaker.
A wired connection between the speakers oers digital audio resolution up to 196 kHz / 24 Bit. You may wish to
take advantage of this capability when playing very high resolution audio.
1. To connect the Focus Primary and Client speakers, use a phono cable to connect the “Coax Out” socket (A-4) of the
Primary speaker to the “Coax In” socket (B-4) of the Client speaker.
The wired connection between the speakers will automatically take over from the wireless connection. This can be
confirmed via the Set-up and Control app: Settings > Speaker Info.
For the location of the coaxial input and output sockets, see Illustration: Focus Speaker Sockets.
Note
Always use good quality audio cables with your Focus speakers. Your Dynaudio retailer will be able to advise
on cable choice.
Connecting and Switching On Your Focus Speakers 21

Dynaudio Focus Specifications

General

Brand	Dynaudio
Model	Focus
Category	Speakers
Language	English