8
5 secs
Night mode
If the appliance is not in auto mode, the airflow speed will reduce to level 4. When night mode is activated, if it is already
below level 4, it will remain the same. This can be manually changed if desired. The display will illuminate briefly, then fade
as before. If in auto mode the airflow speed will be reduced automatically.
When night mode is enabled (indicated by an illuminated
half moon symbol in the bottom right corner of the display),
the display will dim and after 5 seconds will fade to off. The
half moon symbol remains illuminated.
The night mode will dim the display and run quietly, making it ideal for use while sleeping.
Diffused and focused modes
Diffused mode
Press the wide angle button
to change from a personal
directed airflow to a whole
room airflow.
Heating and fan modes
work in this mode.
Focused mode
Press the narrow angle button
to change from a whole room
airflow to a personal directed
airflow.
Heating and fan modes work
in this mode.
Oscillation Airflow speed control
Airflow speed control
To change the airflow
speed press the airflow
control button. The digital
display will show the new
speed; after 3 seconds it will
change back to the target
temperature.
Oscillation control
To start the appliance
oscillating, press the
oscillation control button.
To stop the appliance
oscillating, press it again.
The appliance will not
oscillate when the control
buttons are pressed.
21.02.2017 15:52 - C84661_HP03_OPMAN_ANZ_ X455_84661.indd_15_4c0s
To Next Page
Loading...
Need help?
General
