Dyson V12 Detect Slim User Manual

Clearing blockages
Disconnect your machine from the charger before looking for blockages.
Be careful not to touch the trigger and be aware of sharp objects.
Leave your machine to cool down before looking for blockages.
Don’t use your machine when looking for blockages as this could cause injury.
Remove the bin and check for blockages in the main body of your machine.
Make sure any blockages are completely cleared and all parts are fitted before using your machine.
If your machine detects a blockage, the motor will pulse and you won’t be able to use your machine until the blockage has been cleared.
If you try to use your machine when the motor is pulsing, it will automatically cut out.
To check for blockages in the main body of the machine, remove the bin following the instructions in the Cleaning your bin section and remove the blockage.
If you cannot clear an obstruction, you may need to remove the brush bars.
Refit all parts securely before using your machine.
Clearing blockages isn’t covered by your guarantee.
Washing your filter
Wash your filter at least once a month to maintain optimum suction power.
For more information and support for your machine go online: www.dyson.com/support
Important: your filter must be completely dry before you put it back into the
machine. Your machine could be damaged if used with a damp filter.
Twist off your filter

Dyson V12 Detect Slim Specifications

General

Turbo	Yes
Cleaning type	Dry
Cleaning surfaces	Carpet, Hard floor
Number of settings	3
Vacuum air filtering	-
Dirt separating method	Cyclonic
Color name	Sprayed Gloss Gold /Gloss Gold
Display type	LED
Product color	Gold
Dust container type	Bagless
Power source	Battery
Charging time	4 h
Suction power	150 AW
Battery voltage	- V
Package depth	154 mm
Package width	806 mm
Package height	271 mm
Package weight	5580 g
Vacuum brushes included	Motorized brush

Weight and Dimensions

Depth	252 mm
Width	250 mm
Height	Blablabla mm
Weight	2400 g