Time during which the load can be supplied by the UPS operating on battery power.
Internal UPS test to check battery status.
The devices connected to the UPS can be started even if AC input power is not
available. The UPS operates on battery power alone.
Battery discharge beyond the permissible limit, resulting in irreversible damage
to the battery.
Devices or equipment connected to the UPS output.
This is a battery-voltage level indicating that battery power is low and that the user
must take action in light of the imminent break in the supply of power to the load.
The AC-power line supplying the UPS under normal conditions.
Ratio of the power effectively drawn by the load to the maximum output of the UPS.
It is possible to modify certain UPS parameters set in the factory. Certain UPS
functions can also be modified by the software to better suit user needs.
Controllable outlets for automatic load shedding, remote shutdown and sequential
restart (personalised using software).
Uninterruptible Power System.
This function enables or disables initiation of UPS ON/OFF control sequences by
computer power-management software
To Next Page
Loading...
Need help?
General
