Name: Eaton 9130 UPS
Brand: Eaton
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Eaton

9130 UPS (700–3000 VA) User's Guide S 164201718 Rev 3 www.eaton.com/powerquality

101

Chapter 8 Troubleshooting

The Eaton 9130 is designed for durable, automatic operation and also

alerts you whenever potential operating problems may occur. Usually

the alarms shown by the control panel do not mean that the output

power is affected. Instead, they are preventive alarms intended to alert

the user.

In general:

S Events are silent conditions that are recorded in the Event Log as

status information, such as “Clock Set Done.”

S Notices are announced by a beep every 5 seconds, recorded in the

Event Log, and displayed on the LCD. Examples are “UPS on

Battery” and “UPS on Bypass.”

S Alarms are announced by a beep every second, recorded in the Event

Log, displayed on the LCD, and the Alarm indicator illuminates.

Examples are “Output Overload” and “Heatsink Overtemperature.”

Use the following troubleshooting chart to determine the UPS alarm

condition.

Typical Alarms and Conditions

To check the UPS Status menu for a list of active alarms:

1. Press any button on the front panel display to activate the menu

options.

2. Press the

button until UPS STATUS displays.

3. Press the Enter button to display the list of active alarms.

Questions and Answers:

Need help?

Do you have a question about the Eaton 9130 UPS and is the answer not in the manual?

Eaton 9130 UPS Specifications

General