-20-
it by press ON button less than 0.5 second, and enable it by press ON
button less than 0.5 second again. If the new warning or fault alarm is
appeared, the buzzer will beep again.
Using the CVCF mode, you may use it without batteries, if the open
battery alarm is too annoying, you can mute it through software.
Alarm Table List
NO. Status Alarm
1 Battery mode Beep once every 4 sec
2 Battery mode with battery low Beep once every sec
3
Bypass mode
Beep once every 2 min
4 Overload Beep twice every sec
5
Warning active
(see Warning& Fault Code Table )
Beep once every sec
6 Fault active Beep continuously
7 Button function active Beep once
To Next Page
Loading...
Need help?
General
