To Next Page

To Previous Page

Page 10

9PX-6K-SP_EN

3. Installation for 9PX 6K SP

3.1 Inspecting the equipment

If any equipment has been damaged during shipment, keep the shipping cartons and packing materials

forthecarrierorplaceofpurchaseandleaclaimforshippingdamage.Ifyoudiscoverdamageafter

acceptance,leaclaimforconcealeddamage.

Toleaclaimforshippingdamageorconcealeddamage:

1. File with the carrier within 15 days of receipt of the equipment;

2. Send a copy of the damage claim within 15 days to your service representative.

Check the battery recharge date on the shipping carton label. If the date has passed and the

batteries were never recharged, do not use the UPS. Contact your service representative.

3.2 Unpacking the cabinet

• Unpacking the cabinet in a low-temperature environment may cause condensation to occur in and on

the cabinet. Do not install the cabinet until the inside and outside of the cabinet are absolutely dry

(hazard of electric shock).

• The cabinet is heavy (see "Weights and dimensions" on page 43). Follow Special precautions

provided on page 4 and on the carton.

Unpack the equipment and remove all the packing materials and shipping carton.

Note: Do not lift the UPS from the front panel.

Unpacking UPS.

Discard or recycle the packaging in a responsible manner, or store it for future use.

Placethecabinetinaprotectedareathathasadequateairowandisfreeofhumidity,ammablegas,and

corrosion.

Packing materials must be disposed of in compliance with all local regulations concerning waste.

Recycling symbols are printed on the packing materials to facilitate sorting.

Eaton 9PX8KSP User Manual

Questions and Answers: