9 Accessories
9.1 Con n ec tor s
EMS2… Electronic motor starter 10/19 MN034003EN www.eaton.com 53
9 Accessories
9.1 Connectors
9.1.1 Three-phase current connector
The EMS2-XBR-… three-phase current connectors bridge the supply termi-
nals (1L1 / 3L2 / 5L3) of multiple EMS2 electronic motor starters.
They are available in various versions which differ, on the one hand, in the
number of motor starters to be connected and, on the other hand, in the ter-
minal technology used (screw terminals or push-in terminals) (￫ table 12).
The distance of the individual terminal blocks from one another is designed
so that they can also be used if the motor starters are fitted at a distance of
22.5 mm from one another. The length l of the connection cable is 3 m.
Figure 30: Three-phase current connector
I
d
d
To Next Page
Loading...
Need help?
General
