Eaton Power Defense NRX NF Series User Manual

3
EATON CORPORATION www.eaton.com
Instructions for Undervoltage Release, Shunt Trip, and Overcurrent
Trip Switch
Instructional Leaflet IL0131087EN
Effective January 2019
Table 1. Shunt Trip Ratings.
Control
Voltage Frequency
Operational
Voltage
(Range 70 - 110%)
Inrush/Continuous
Power
Consumption (VA)
Opening
Time (ms)
24 DC 17 - 26 400/2 25
48 DC 34 - 53 500/3 25
60 DC 42 - 66 500/4 25
110–127 50 - 60 Hz 77 - 140 800/8 25
110–125 DC 77 - 138 800/8 25
208–240 50 - 60 Hz 146 - 264 850/8 25
220–250 DC 154 - 275 850/8 25
Table 2. Undervoltage Release Ratings.
Control
Voltage Frequency
Operational
Voltage
Range
(85 - 110%)
Dropout
Voltage
Range
(35 - 60%)
Inrush/Continuous
Power
Consumption (VA)
Opening
Time (ms)
24 DC 20 - 26 8 - 14 425/2 50
32 DC 27 - 35 11 - 19 N/A 50
48 DC 41 - 53 17 - 29 750/3 50
60 DC 51 - 66 21 - 36 825/4 50
110 - 127 50–60 Hz 94 - 140 44 - 66 1150/8 50
110 - 125 DC 94 - 138 44 - 66 1150/8 50
208 - 240 50–60 Hz 177 - 264 84 - 125 1200/8 50
220 - 250 DC 187 - 275 88 - 132 1200/8 50
380 - 415 AC 323 - 457 145 - 228 N/A 50
480 AC 408 - 528 168 - 288 N/A 50
600 AC 510 - 660 210 - 360 N/A 50
Table 3. Overcurrent Trip Switch Ratings.
Control Voltage Frequency Contact Rating (Amperes)
250 50 - 60 Hz 10
125 DC 0.5
250 DC 0.25
Section 2: Installation of Undervoltage Re-
lease and/or Shunt Trip in Left Accessory Tray
Proceed with the following 13 steps:
Step 1: Remove the four screws holding the front cover in place (two
on each side of the cover).
Figure 4. Step 1 (NF Frame Shown).
Step 2: Remove the front cover. Pull down on the charging handle to
simplify removal.
Figure 5. Step 2 (NF Frame Shown).

Eaton Power Defense NRX NF Series Specifications

General

Brand	Eaton
Model	Power Defense NRX NF Series
Category	Circuit breakers
Language	English