Echo HC-150 User Manual

20
exhausT sysTem
Spark Arrestor Screen
Level 2.
Parts required: Screen, Gasket
1. Remove engine cover. See “Cleaning Cooling System” for step by
step instructions.
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3. Remove exhaust guide (A), gasket (B), and screen (C) from mufer
body.
4. Clean carbon deposits from mufer components.
NOTE
When cleaning carbon deposits, be careful not to damage the cata-
lytic element inside mufer.
5. Replace screen if it is cracked, plugged or has holes burned through.
6. Assemble components in reverse order.
NOTE
When installing the engine cover, be certain the mufer gasket tabs
(D) are locked into the mufer grill slots and the stop switch lead is
seated in the rubber grommet.
D
A
B
C

Echo HC-150 Specifications

General

Brand	Echo
Model	HC-150
Category	Trimmer
Language	English