GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
25
EQUIPMENT CHECK
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tightenand/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
• Inspect shield for damage and ensure that the cut-off knife issecurely
in place. Replace if either is damaged or missing.
• Check that the cutting attachment is firmly attached and in safe
operating condition.
• Check that front (loop) handle and optional shoulder/waist harness
are adjusted for safe, comfortable operation. See Assembly Section
for proper adjustment.
• Have repairs done only by an authorized ECHO Dealer.
• Do not use any attachment, accessory or replacement part unless it is
recommended in this Operator's Manua
DETERMINE OPERATION AREA
WARNING DANGER
Inspect starting area for hazards such as rocks, glass, debris etc.
which could be contacted by the cutting attachment when starting.
Keep helpers and bystanders at least 15 m (50 ft.) from starting area,
otherwise serious personal injury may result.
• Before starting the unit, equip yourself and any other personworking
within the 15 m (50 ft.) Safety Zone with the required Protective
Equipment and clothing.
• Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than 15 m (50 ft.) while the
trimmer is in use.
15 m
(50 ft.)
To Next Page
Loading...
Need help?
General