EasyManuals Logo
Home>Echo>Trimmer>SRM-231

Echo SRM-231 User Manual

Echo SRM-231
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
27
4. Start - Pull Rope.
Lay the trimmer on a flat, clear area and pull the recoil starter handle
(D) until engine fires.
5. Open Choke - Run.
Move the choke lever to the OPEN - RUN position. Restart engine
if necessary and allow to warm up running at idle for several
minutes.
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
WARNING DANGER
When engine starts, the cutting attachment may rotate even with
the throttle trigger in idle (released) position.
1. Stop Switch - Start/Run. Move stop switch button (A) away from
the STOP position.
2. Primer - Pump Bulb. Pump primer bulb (C) until fuel is visible and
flows freely in the clear fuel tank return line. Pump bulb an addi-
tional 4 or 5 times.
3. Start - Pull Rope. Lay the trimmer on a flat, clear area and pull
the recoil starter handle (D) until the engine fires.
A
D
D
C

Other manuals for Echo SRM-231

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-231 and is the answer not in the manual?

Echo SRM-231 Specifications

General IconGeneral
BrandEcho
ModelSRM-231
CategoryTrimmer
LanguageEnglish

Related product manuals